Teledyne DALSA Xtium2 CLHS PX8 LC

 

 

 
產品簡介

Teledyne DALSA Xtium2 CLHS PX8 LC

Xtium™2 CLHS PX8 LC在PCI Express™Gen 3.0平台上具有CameraLink HS標準。 

Xtium2-CLHS支持有源光纜(AOC),以將電纜長度擴展到100米以上。

 這種單電纜單插槽解決方案最多支持4-CLHS通道,每個通道以10.3 Gbit / s的速度運行,以高達5.0 GB / s的速度採集圖像,並使用PCIe x8插槽將其傳輸到主機記憶體。

產品特色

- Half-length PCI Express Gen 3.0 x8

- 符合 Camera Link HS 標準

- 傳輸可達10.3 Gbits/sec,Max Data rate: 5 GBytes/sec,Host transfers up to 6.8 GB/sec

- 512 MB image buffer

- Microsoft® Windows® 7, 8(32/64-bit), WOW64

 

商品規格

Xtium™2-CLHS-PX8 LC規格

零件編號 OR-A8S0-PX840
版規 PCIe
影像卡介面 Camera Link HS
Host Bus Half-length PCI Express Gen 3.0 x8
相機格式 CLHS 1 to 4 lane configurations, 10.3 Gbits/sec; X-Protocol utilises 97% of available bandwidth for image transfers, Max Data rate: 5.0 GBytes/sec
Connectors
1 x CX4 for image acquisition, Active Optical Cable (AOC) ready
1 x CX4 for Data-Forwarding
1 x DH60-27P for Board Trigger, Strobe and General I/Os (main bracket)
1 x 16-pin connector Multi-Board-Sync
Pixel Clock Mono8, Mono10, Mono12 and Mono16
Frame Buffer 512 MB image buffer
相機控制 Comprehensive event notification, Timing control logic for camera trigger, line scan direction and strobe signals, Camera control through GenCP/SFNC, Bit-Error detection and correction
特點 Board Sync Data Forwarding across multiple boards and PC for distributed image processing, Multi-Board Synchronization: grab seamless image from multiple cameras and multiple frame grabbers in a PC, AOC cables deliver long cable lengths at maximum data rate, Image Cropping, Horizontal and vertical image flip, Delivers Trigger-To-Image Reliability Framework for powerful non-intrusive diagnostics
軟體 Sapera LT SDK, Sapera Vision Software, NB: Contact Teledyne DALSA sales for Linux availability
支援 OS Windows 7 (32-bit), Windows 7 (64-bit), Windows 8 (32-bit), Windows 8 (64-bit), Windows 10 (32-bit), Windows 10 (64-bit), Linux (64-bit), WoW64

 

登入

登入成功